INCH-POUND
MIL-DTL-43719/3B
6 APRIL 2009
SUPERSEDING
MIL-M-43719/3A
27 April 1977
DETAIL SPECIFICATION SHEET
MARKING MATERIALS AND MARKERS, ADHESIVE, ELASTOMERIC,
PIGMENTED; SYMBOLS
This specification is approved for use by all
Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-
43719.
REQUIREMENTS:
Materials. Symbols shall be cut from elastomeric marking materials, liner, and when specified in the contract or
order, translucent transfer sheet, all conforming to requirements specified in MIL-DTL-43719.
Ink. Where required for pictorial or other designs on a symbol marker, the ink or inks used shall be compatible with
the specified marking material and with each other. When tested as specified herein, the ink-coated marking
materials shall meet the performance requirements of the general specification. Ink colors shall be as shown on
the drawing or as specified in the contract or order.
Design and construction. Shall be as specified herein or as specified in the contract or order. Options shall be as
specified in the contract or order.
Drawings. The following symbols shall be of the design and construction shown in applicable drawings or
descriptions:
Symbol
Applicable Drawing or Description
Star
See "Army Star" description
Red Cross
See "Red Cross" description
Description.
Army Star. The star shall have 5 points with tips uniformly spaced in a circle. The star shall be regular in
shape, i.e., the sides of the points shall lie in the straight lines joining alternate tips. The star shall consist of
release liner, elastomeric marking material, and translucent transfer sheet. The size of the star shall be as
specified in the contract or order in terms of the diameter, in inches, of the imaginary circle passing through all
five tips of the star. The color shall be gloss white, color No. 17875, lusterless white, color No. 37875 or
lusterless black, color No. 37038, as specified in the contract or order.
Red Cross. Shall consist of release liner, elastomeric marking material (square) with a Red Cross screened
thereon, and translucent transfer sheet. The Red Cross shall be screened on in gloss red, color No. 11136, or
in lusterless red, color No. 31136 on a field of the marking material in gloss white, color No. 17875 or lusterless
white, color No. 37875, respectively, as specified in the contract or order. For a 3 inch Red Cross, the marker
field shall be 4 inches square and other sizes shall be proportional. The Red Cross shall be centrally located
and shall be aligned square with the field.
AMSC N/A
FSC 7690
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business