NOT MEASUREMENT
SENSITIVE
MIL-PRF-61002B
30 JUNE 2008
SUPERSEDING
MIL-PRF-61002A
25 SEPTEMBER 1995
PERFORMANCE SPECIFICATION
PRESSURE-SENSITIVE ADHESIVE LABELS FOR BAR CODING
This specification is approved for use by all Departments and Agencies of the Department
of Defense.
1. SCOPE
1.1 Scope. This specification covers the requirements for pressure-sensitive adhesive
labels that meet or exceed the end user's necessary performance criteria for use in the
implementation of bar code marking/reading operations.
1.2 Classification. The labels furnished in accordance with this specification will be of
the following types, grades, styles and compositions as specified in the contract or order (see
6.2):
1.2.1 Types. The types of pressure-sensitive adhesive labels are as follows:
Type I
Blank label sheet(s)
Type II
Blank label roll(s)
Type III
Barcoded label(s) cut on sheet(s)
Type IV
Barcoded label(s) cut on roll(s)
Type V
Special (specify)
Comments, suggestions, or questions on this document should be addressed to Chief, USAMC
LOGSA Packaging, Storage, and Containerization Center, ATTN: AMXLS-AT, 11 Hap Arnold
Boulevard, Tobyhanna, PA 18466-5097 or e-mailed to toby.pt@us.army.mil. Since contact
information can change, you may want to verify the currency of this address information using the
ASSIST Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 7690
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business