INCH-POUND
MIL-DTL-43719/4A
6 APRIL 2009
SUPERSEDING
MIL-M-43719/4
31 March 1981
DETAIL SPECIFICATION SHEET
MARKING MATERIALS AND MARKERS, ADHESIVE, ELASTOMERIC,
PIGMENTED; HAZARDOUS MATERIAL SYMBOLS
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
The requirements for acquiring the product described herein shall consist of this
specification sheet and MIL-DTL-43719.
REQUIREMENTS:
Material. Material for the basic marker (figure 1) shall conform to type I, class 3, color white
of ASTM D4956.
Colors. Colors shall conform to the following (see table I of MIL-DTL-43719):
Color name
Color number
Red
11105
Light yellow
13655
Orange yellow
13538
Light blue
15102
Insignia blue
15044
Jet black
17038
Design. The design of the basic marker shall be as shown in figure 1. The size and
dimensions of the basic marker shall be as shown in figure 2.
Specific hazard symbols and numerals. Specific hazard symbols and numerals shall be
mounted on a translucent transfer sheet in accordance with 3.2.2 of MIL-DTL-43719.
Specific hazard symbols. Specific hazard symbols are as follows: ACID, ALK, COR, OXY, W
The heights of the letters shall be one-half the height of the corresponding numerals for the
specified size marker. The color of the letters shall be black. In all other respects, they shall
conform to MIL-DTL-43719/3.
Numerals. Numerals are as follows: 0, 1, 2, 3, and 4
Numerals shall conform to MIL-DTL-43719/1. The color of the numerals shall be black or
white as specified.
AMSC N/A
FSC 7690
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business