INCH-POUND
MIL-DTL-43719D
6 APRIL 2009
SUPERSEDING
MIL-M-43719C
30 September 1992
DETAIL SPECIFICATION
MARKING MATERIALS AND MARKERS, ADHESIVE, ELASTOMERIC, PIGMENTED;
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and Agencies of the Department of Defense.
1.
SCOPE
1.1
Scope. This specification covers the general requirements for adhesive-backed, pigmented,
elastomeric marking materials (see 6.1) in roll and sheet form. Requirements for individual markers, (i.e.,
letters, numerals, legends, symbols, and hazardous material symbols) are covered by the specification sheets.
1.2
Classification. The marking materials will be of the following types and classes, as specified (see 6.2).
Type I
- Pressure sensitive adhesive type (see 6.1.1)
Type II
- Positionable pressure sensitive adhesive type (see 6.1.2) (Applicable
primarily to markers 16 inches or larger in size)
Type III
- Heat activated adhesive type (see 6.1.3)
Class 1
- High adhesion (permanent) (see 6.1)
Class 2
- Low adhesion (temporary) available in type I and II only (see 6.1)
2.
APPLICABLE DOCUMENTS
2.1
General. The documents listed in this section are specified in section 3, 4, or 5 of this standard.
This section does not include documents cited in other sections of this standard or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list,
document users are cautioned that they must meet all specified requirements of documents cited in section 3,
4, or 5 of this specification, whether or not they are listed.
Comments, suggestions, or questions on this document should be addressed to Defense Supply Center
Philadelphia (DSCP), ATTN: DSCP-NASA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or e-mail to
dscpg&inspecomments@dla.mil . Since contact information can change, you may want to verify the currency
of this address information using ASSIST Online database at https://assist.daps.dla.mil .
AMSC N/A
FSC 7690
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business