MIL-DTL-43719D
FEDERAL HIGHWAY ADMINISTRATION
Standard Highway Signs (SHS) 2004 Edition
(Copies of this document are available online at https://mutcd.fhwa.dot.gov/ser-shs_millennium_eng.htm .)
Non-Government publications. The following documents form a part of this specification to the
2.3
extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the
solicitation or contract.
AMERICAN SOCIETY FOR QUALITY (ASQ)
ASQ Z1.4
Sampling Procedures and Tables for Inspection by Attributes
(Copies of this document are available from www.asq.org or the American Society for Quality, 611 East
Wisconsin Avenue, Milwaukee, WI 53202.)
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM A204/A204M
Standard Specification for Pressure Vessel Plates, Alloy Steel,
Molybdenum
ASTM B209
Standard Specification for Aluminum and Aluminum-Alloy Sheet and
Plate
ASTM D523
Standard Test Method for Specular Gloss
ASTM D568
Standard Test Method For Rate of Burning and/or Extent and Time of
Burning of Flexible Plastics in a Vertical Position
ASTM D822
Standard Practice for Filtered Open-Flame Carbon-Arc Exposure
Apparatus of Paint and Related Coatings
ASTM D1014
Standard Practice for Conducting Exterior Exposure Tests of Paints and
Coatings on Metal Substrates
ASTM D1730
Standard Practices for Preparation of Aluminum and Aluminum-Alloy
Surfaces for Painting
ASTM D2244
Standard Practice for Calculation of Color Tolerances and Color
Differences from Instrumentally Measured Color Coordinates
ASTM D2370
Standard Test Method for Tensile Properties of Organic Coatings
ASTM D2805
Standard Test Method for Hiding Power of Paints by Reflectometry
ASTM D2860/D2860M
Standard Test Method for Adhesion of Pressure-Sensitive Tape to
Fiberboard at 90° Angle and Constant Stress
ASTM G21
Standard Practice for Determining Resistance of Synthetic Polymeric
Materials to Fungi
(Copies of these documents are available from www.astm.org or the American Society for Testing and
Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
2.4
Order of precedence. Unless otherwise noted herein or in the contract, in the event of a conflict
between the text of this document and the references cited herein, the text of this document takes precedence.
Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption
has been obtained
3.
REQUIREMENTS
3.1
First article. When specified (see 6.2), a sample shall be subjected to first article inspection (see
6.3) in accordance with 4.3.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business