MIL-DTL-43719D
Table I. Minimum contrast ratio FED-STD-595.
Color name
Color No.
Contrast ratio (min.)
Light blue
15102
0.98
Insignia blue
15044
0.98
Light green
14187
0.98
Olive drab
14084
0.98
Light yellow
13655
0.96
Orange yellow
13538
0.96
Aircraft cream
13594
0.96
International orange
12197
0.96
Red
11136
0.95
Red
11105
0.95
Green
14187
0.98
Magenta
17142
0.95
Insignia white
17875
0.97
Aircraft gray
16473
0.98
Engine gray
16081
0.98
Jet black
17038
0.98
3.7.14
Application properties. Marking materials, applied in accordance with 4.4.2.5, shall not
separate from the surface at any point, nor show any surface irregularities such as wrinkling or bubbling.
3.7.15
Storage stability. Marking materials shall meet the designated requirements of this
specification when tested as specified in 4.4.2.5 after storage for the following number of months after
manufacture:
Type I and II, class 1
- 24 months
Type I and II, class 2 and type III, class 1
- 12 months
3.7.16
Resistance to fungi. The marking materials shall show no evidence of fungus growth when
tested as specified in 4.4.2.5.
Instruction. Instructions defining a step-by step procedure for application of the marking
3.7.17
materials and markers shall be furnished in each package of material (roll or quantity of sheets) or in each
package of markers, as applicable. The instructions shall include recommended surface preparation and any
restrictions as to application procedure and conditions.
3.8 Workmanship. The end item shall conform to the quality of product established by this
specification.
4.
VERIFICATION
4.1 Certificates of compliance. When certificates of compliance are submitted, the Government
reserves the right to inspect such items to determine the validity of the certification.
4.2
Classification of inspections. The inspection requirements specified herein are classified as follows:
a.
First article inspection (see 4.3).
b.
Conformance inspection (see 4.4).
4.3 First article inspection. when a first article is required (see 6.2), it shall be examined for the
defects specified in 4.4.2 through 4.4.2.4 and tested as specified in 4.4.2.5.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business